Gutter Installation Cost Calculator
Quick answer: For about 180 feet of seamless aluminum on a one-story, 2,000 square foot home, expect roughly $2,000 to $4,100 with four downspouts and removal of the old gutters, and about $2,850 in a typical case. Two-story homes, 6-inch gutters and gutter guards raise the total.
Estimate gutter installation cost per linear foot for aluminum, vinyl, steel or copper. Add downspouts, guards and removal for a low, typical and high price.
Estimated total
- Low
- $890
- Typical
- $1,765
- High
- $2,660
$9.81 per linear ft all-in (range $4.94–$14.78)
Where the money goes (typical)
- Materials
- $748 (42%)
- Labor
- $1,017 (58%)
Line items (typical)
| Vinyl (PVC), sectional | $1,440 |
| Downspouts (about four for an average home) | $200 |
| Remove and dispose of old gutters | $125 |
Cheapest option and DIY-friendly. Can crack in hard freezes and sag in heat; 10–20 year life.
General U.S. estimates for installed cost, not quotes. Checked on 8 November 2026 against HomeGuide's 2026 gutter installation guide ($12 to $25 per foot, $2,200 to $5,000 for an average home, downspouts $30 to $75 each) and Inch Calculator's gutter installation cost guide (national average about $2,300). Prices reviewed November 2026. Get at least three local quotes before you commit.
Gutters are priced by the linear foot: the total length of gutter along the eaves. Installers multiply that length by an installed price for the material, then add downspouts, removal of the old system, and a premium for second-story work or larger 6-inch gutters.
This estimator follows the same steps. Enter the gutter length, choose the material, and tick the extras that apply. You get a low, typical and high price, the split between materials and labor, and the cost per foot to compare with your quotes.
How the gutter installation cost estimate works
- Enter the gutter length in linear feet.
- Multiply it by the installed price per linear ft for the material you chose.
- Adjust for home height, gutter size and your local cost level.
- Add the extras you ticked, such as removal, and any permit fee.
- Show the result as a low, typical and high total, split into materials, labor and fees.
Measure the length of every roof edge that sheds water (the eaves), not the whole perimeter. If you only know your home's size, gutter length is roughly one tenth of the floor area: about 180 feet for a 2,000 square foot home.
Gutter Installation Cost by material
| Material | Installed per linear ft | Labor share | Notes |
|---|---|---|---|
| Vinyl (PVC), sectional | $4.00–$12.00 | 55% | Cheapest option and DIY-friendly. Can crack in hard freezes and sag in heat; 10–20 year life. |
| Aluminum, sectional | $7.00–$14.00 | 55% | Pre-cut lengths joined on site. Cheaper than seamless, but every joint is a possible leak. |
| Aluminum, seamless (most common) | $10.00–$20.00 | 60% | Formed on site to the length of each run, so seams appear only at corners. 20–30 year life. |
| Galvanized steel | $10.00–$27.00 | 55% | Stronger than aluminum against ladders, ice and falling branches. Heavier, and can rust once the coating wears. |
| Copper | $25.00–$50.00 | 40% | Premium look that weathers to a patina. Soldered by specialists; 50 years or more. |
Gutter Installation Cost by size
Typical total with the low–high range below it. Assumes one story; 5-inch k-style (standard); average u.s.; downspouts (about four for an average home); remove and dispose of old gutters.
| Gutter length | Vinyl (PVC), sectional | Aluminum, sectional | Aluminum, seamless (most common) | Galvanized steel | Copper |
|---|---|---|---|---|---|
| 100 linear ft | $1,150$550–$1,700 | $1,350$850–$1,900 | $1,750$1,150–$2,500 | $2,150$1,150–$3,200 | $3,850$2,650–$5,500 |
| 150 linear ft | $1,550$750–$2,300 | $1,850$1,200–$2,600 | $2,450$1,650–$3,500 | $3,050$1,650–$4,550 | $5,600$3,900–$8,000 |
| 180 linear ft | $1,750$900–$2,650 | $2,150$1,450–$3,000 | $2,850$1,950–$4,100 | $3,550$1,950–$5,350 | $6,650$4,650–$9,500 |
| 200 linear ft | $1,950$950–$2,900 | $2,350$1,550–$3,300 | $3,150$2,150–$4,500 | $3,950$2,150–$5,900 | $7,350$5,150–$10,500 |
| 250 linear ft | $2,350$1,150–$3,500 | $2,850$1,900–$4,000 | $3,850$2,650–$5,500 | $4,850$2,650–$7,250 | $9,100$6,400–$13,000 |
What affects gutter installation cost
- Material. Seamless aluminum is the default for most homes. Vinyl costs least, galvanized steel resists dents, and copper costs two to three times as much as aluminum.
- Seamless or sectional. Seamless gutters are roll-formed on site and cost about $3 to $5 more per foot than sectional ones, but they leak far less because there are joints only at corners.
- Height and roofline. Second-story runs add about $1 to $3 per foot for ladders, staging and safety gear. Many corners, valleys and short runs add cutting and fitting time.
- Gutter size. Most homes use 5-inch K-style gutters. Large or steep roofs and heavy-rain areas may need 6-inch gutters, which add about $1 to $2 per foot.
- Fascia condition. Gutters hang from the fascia board. Rotten fascia has to be replaced first, at about $5 to $12 per linear foot, and is often only found when the old gutters come down.
Frequently asked questions
How much does gutter installation cost?
For about 180 feet of seamless aluminum on a one-story, 2,000 square foot home, expect roughly $2,000 to $4,100 with four downspouts and removal of the old gutters, and about $2,850 in a typical case. Two-story homes, 6-inch gutters and gutter guards raise the total.
How much do gutters cost per linear foot?
Installed, vinyl runs about $4 to $12 per foot, sectional aluminum $7 to $14, seamless aluminum $10 to $20, galvanized steel $10 to $27 and copper $25 to $50. Prices include materials, hangers, corners and labor.
How many feet of gutters does a house need?
Most homes need 100 to 250 linear feet. A quick estimate is one tenth of the home's floor area, so a 2,000 square foot house needs about 180 to 200 feet. Measure the eaves for an exact figure.
Are seamless gutters worth the extra cost?
Usually, yes. They cost about $3 to $5 more per foot than sectional gutters, but joints are where most gutters leak and sag, and seamless runs only have them at corners and downspouts.
How much do downspouts and gutter guards cost?
Downspouts cost about $30 to $75 each installed, and an average home needs four to six. Gutter guards add about $15 to $45 per linear foot, depending on whether they are simple screens or micro-mesh.
How long do gutters last?
Vinyl lasts about 10 to 20 years, aluminum 20 to 30, galvanized steel 20 to 50, and copper 50 years or more. Clean them twice a year to get the full life.
About these figures
General U.S. estimates for installed cost, not quotes. Checked on 8 November 2026 against HomeGuide's 2026 gutter installation guide ($12 to $25 per foot, $2,200 to $5,000 for an average home, downspouts $30 to $75 each) and Inch Calculator's gutter installation cost guide (national average about $2,300). Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.