Driveway Paving Cost Calculator
Quick answer: A new 500 square foot asphalt driveway (about 20 by 25 feet) typically costs $3,500 to $6,500, or about $5,000 in a typical case. Tear-out of an old driveway adds about $500 to $2,000, and resurfacing a sound driveway costs roughly half as much as a new one.
Estimate asphalt driveway paving cost by size. Choose a new driveway or a resurface, add tear-out, sealcoating and permits for a low, typical and high price.
Estimated total
- Low
- $3,500
- Typical
- $5,000
- High
- $6,500
$10.00 per sq ft all-in (range $7.00–$13.00)
Where the money goes (typical)
- Materials
- $3,000 (60%)
- Labor
- $2,000 (40%)
Line items (typical)
| New asphalt driveway (4 in on a gravel base) | $5,000 |
Hot-mix asphalt laid and rolled over 4 to 8 inches of compacted crushed stone. The standard for a new or fully rebuilt driveway.
General U.S. estimates for installed cost, not quotes. Checked on 9 November 2026 against This Old House's driveway repaving guide (updated 5 June 2026: tear-out $1 to $4 per sq ft, sealcoating $0.70 to $2.10 per sq ft, permits $50 to $500), Inch Calculator's asphalt driveway guide (new driveway $7 to $13 per sq ft, about $5,000 for 500 sq ft, 20 to 30 year life) and Fixr's driveway sealing guide (updated 31 January 2025: resurfacing $4 to $8 per sq ft). Prices reviewed November 2026. Get at least three local quotes before you commit.
Asphalt driveways are priced by the square foot of paved area. The installed price covers the hot-mix asphalt, delivery, spreading and rolling, and for a new driveway the compacted stone base underneath. Tearing out an old driveway, sealcoating and permits are extra.
Enter the driveway size and choose a new driveway or a resurface. The estimator gives a low, typical and high price, the split between materials and labor, and the cost per square foot to compare with paving quotes.
How the asphalt driveway paving cost estimate works
- Enter the driveway area in square feet.
- Multiply it by the installed price per sq ft for the material you chose.
- Adjust for your local cost level.
- Add the extras you ticked, such as removal, and any permit fee.
- Show the result as a low, typical and high total, split into materials, labor and fees.
Multiply driveway length by width. A one-car driveway is usually 10 to 12 ft wide and a two-car driveway 20 to 24 ft wide, so a 20 by 25 ft two-car driveway is 500 sq ft. Add any parking pad or turnaround.
Driveway Paving Cost by material
| Material | Installed per sq ft | Labor share | Notes |
|---|---|---|---|
| New asphalt driveway (4 in on a gravel base) | $7.00–$13.00 | 40% | Hot-mix asphalt laid and rolled over 4 to 8 inches of compacted crushed stone. The standard for a new or fully rebuilt driveway. |
| Resurface (new top layer on a sound base) | $4.00–$8.00 | 45% | A 1.5 to 2 inch overlay over existing asphalt that is cracked or faded but not sinking. Cheaper, but it fails early on a broken base. |
Driveway Paving Cost by size
Typical total with the low–high range below it. Assumes average u.s..
| Driveway area | New asphalt driveway (4 in on a gravel base) | Resurface (new top layer on a sound base) |
|---|---|---|
| 200 sq ft | $2,000$1,400–$2,600 | $1,100$800–$1,600 |
| 400 sq ft | $4,000$2,800–$5,200 | $2,200$1,600–$3,200 |
| 500 sq ft | $5,000$3,500–$6,500 | $2,750$2,000–$4,000 |
| 600 sq ft | $6,000$4,200–$7,800 | $3,300$2,400–$4,800 |
| 800 sq ft | $8,000$5,600–$10,400 | $4,400$3,200–$6,400 |
What affects asphalt driveway paving cost
- New driveway or resurface. A resurface (overlay) only adds a new top layer and costs roughly half as much, but it is only worth it when the base is sound. Sinking, potholes or wide cracks mean the base has failed and the driveway needs to be rebuilt.
- Tear-out of the old surface. Breaking up and hauling away old asphalt or concrete adds about $1 to $4 per square foot. Some contractors charge less because old asphalt can be recycled.
- Base, grading and drainage. A new driveway needs 4 to 8 inches of compacted crushed stone over firm soil. Soft or poorly drained soil needs more excavation and stone, which can add a lot to the price.
- Thickness. 4 inches of asphalt is enough for cars. Driveways that carry trucks, RVs or delivery vehicles should be 5 to 6 inches thick, which uses more asphalt.
- Size and access. Paving crews have a minimum charge, so small driveways cost more per square foot. Long, narrow or steep driveways take more time to pave and roll.
Frequently asked questions
How much does it cost to pave a driveway?
A new 500 square foot asphalt driveway (about 20 by 25 feet) typically costs $3,500 to $6,500, or about $5,000 in a typical case. Tear-out of an old driveway adds about $500 to $2,000, and resurfacing a sound driveway costs roughly half as much as a new one.
How much does an asphalt driveway cost per square foot?
A new asphalt driveway usually costs $7 to $13 per square foot installed, including the gravel base. Resurfacing with a new top layer costs about $4 to $8 per square foot.
Is it cheaper to resurface or replace an asphalt driveway?
Resurfacing is cheaper, at about $4 to $8 per square foot against $7 to $13 for new asphalt plus $1 to $4 for tear-out. It only lasts if the base is solid; if the driveway is sinking or breaking up, replacement is the better value.
How long does an asphalt driveway last?
About 20 to 30 years with regular sealcoating every 3 to 5 years. In harsh freeze-thaw climates without sealing, wear can show in under 10 years.
How much does it cost to sealcoat a driveway?
Sealcoating costs about $0.70 to $2.10 per square foot, or roughly $280 to $840 for a 400 square foot driveway. Wait 6 to 12 months after paving before the first coat.
Is asphalt cheaper than concrete for a driveway?
Usually, yes, to install. Asphalt costs less up front and is easier to repair, while concrete costs more but needs less maintenance and lasts longer. Gravel is the cheapest of the three.
About these figures
General U.S. estimates for installed cost, not quotes. Checked on 9 November 2026 against This Old House's driveway repaving guide (updated 5 June 2026: tear-out $1 to $4 per sq ft, sealcoating $0.70 to $2.10 per sq ft, permits $50 to $500), Inch Calculator's asphalt driveway guide (new driveway $7 to $13 per sq ft, about $5,000 for 500 sq ft, 20 to 30 year life) and Fixr's driveway sealing guide (updated 31 January 2025: resurfacing $4 to $8 per sq ft). Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.
Every cost range on this site is also published as an open dataset (CSV and JSON, CC BY 4.0): US home project costs 2026.
Add this asphalt driveway paving cost estimator to your site
Free for blogs, forums and contractors. Paste this code where you want the estimator; it works on phones and needs no sign-up.
Link to this page
Citing this estimate in a blog post, forum answer or client handout? Copy the HTML below.
<a href="https://nailtheestimate.com/driveway-paving-cost/">Driveway Paving Cost Calculator</a> (Nail The Estimate)