Asphalt Calculator
Free asphalt calculator: enter length, width and thickness to get tons of hot mix asphalt for a driveway or parking area, plus an estimated material cost.
- Cubic yards
- 0.97
- Tons
- 1.91
- Cubic feet
- 26.3
- Area
- 100 sq ft
Bulk cost
$210
Before delivery and tax
Advanced: material density
Default price is a typical U.S. figure ($75–$180 per ton), reviewed November 2026. Prices vary by region; enter your supplier's price for an exact total.
Hot mix asphalt is ordered by the ton. To find how many tons you need, multiply the area by the compacted thickness to get the volume, then by the weight of compacted asphalt, which averages about 145 pounds per cubic foot (just under 2 tons per cubic yard).
Enter the size of your driveway, path or parking area and the compacted thickness. The calculator adds 5% for edges and uneven base and shows tons, cubic yards and an estimated material cost. Paving contractors price the finished job per square foot, so use our driveway paving cost estimator for an installed price.
How to calculate how much asphalt you need
- Measure the length and width of the area in feet.
- Decide on depth in inches (see the depth guide below).
- Multiply length × width to get square feet.
- Multiply by depth ÷ 12 to get cubic feet, then divide by 27 for cubic yards.
- Multiply cubic yards by 1.96 to get tons.
Tons = length × width (ft) × thickness (in) ÷ 12 × 145 lb per cu ft ÷ 2,000, plus 5%. 145 lb per cubic foot is the average Inch Calculator uses for driveway and parking-lot mixes (most weigh 142 to 148); Omni Calculator gives 138 to 150. Thickness guidance is from Inch Calculator's asphalt calculator, checked 11 November 2026.
Recommended asphalt depth
| Project | Depth |
|---|---|
| Residential driveway (2 in base + 1 in top) | 3 in |
| Driveway in a cold climate | 4–6 in |
| Light-duty parking lot | 4–5 in |
| Heavy-duty or truck parking | 7–8 in |
How much asphalt for common project sizes
Cubic yards needed before any waste allowance, with tons in brackets (at 1.96 t/yd³).
| Area | 2 in deep | 3 in deep | 4 in deep | 6 in deep |
|---|---|---|---|---|
| 10 × 10 ft | 0.62 yd³ (1.2 t) | 0.93 yd³ (1.8 t) | 1.23 yd³ (2.4 t) | 1.85 yd³ (3.6 t) |
| 10 × 20 ft | 1.23 yd³ (2.4 t) | 1.85 yd³ (3.6 t) | 2.47 yd³ (4.8 t) | 3.7 yd³ (7.3 t) |
| 12 × 12 ft | 0.89 yd³ (1.7 t) | 1.33 yd³ (2.6 t) | 1.78 yd³ (3.5 t) | 2.67 yd³ (5.2 t) |
| 20 × 20 ft | 2.47 yd³ (4.8 t) | 3.7 yd³ (7.3 t) | 4.94 yd³ (9.7 t) | 7.41 yd³ (14.5 t) |
| 12 × 50 ft (driveway) | 3.7 yd³ (7.3 t) | 5.56 yd³ (10.9 t) | 7.41 yd³ (14.5 t) | 11.11 yd³ (21.8 t) |
| 500 sq ft | 3.09 yd³ (6 t) | 4.63 yd³ (9.1 t) | 6.17 yd³ (12.1 t) | 9.26 yd³ (18.1 t) |
| 1,000 sq ft | 6.17 yd³ (12.1 t) | 9.26 yd³ (18.1 t) | 12.35 yd³ (24.2 t) | 18.52 yd³ (36.3 t) |
Tips before you order
- Thickness means compacted thickness. Loose asphalt from the truck rolls down by roughly a quarter, so crews spread it thicker than the finished depth.
- Asphalt needs a compacted crushed-stone base under it: about 4 in over sandy soil and 8 in over clay for a home driveway.
- Omni Calculator puts hot mix at roughly $80 to $200 per metric tonne; ask your local plant, since prices follow oil prices and season.
- Plants often have a minimum load, so very small patches are usually cheaper with cold-patch bags from a hardware store.
Frequently asked questions
How many tons of asphalt do I need for a driveway?
A 10 by 20 ft driveway at 3 inches compacted needs about 3.6 tons (50 cubic feet × 145 lb ÷ 2,000), or about 3.8 tons with 5% extra. A 12 by 50 ft driveway at 3 inches needs about 10.9 tons, 11.4 with extra.
How much does a ton of asphalt cover?
At 3 inches compacted, one ton covers about 55 square feet; at 2 inches, about 83 square feet. Thicker layers cover less.
How much does a cubic yard of asphalt weigh?
About 3,900 pounds, or just under 2 tons, at 145 pounds per cubic foot of compacted hot mix.
How thick should an asphalt driveway be?
At least 3 inches compacted for a home driveway (a 2 inch base layer and a 1 inch top layer), and 4 to 6 inches in cold climates, according to Inch Calculator. Parking lots need 4 to 8 inches depending on traffic.
Link to this page
Citing this estimate in a blog post, forum answer or client handout? Copy the HTML below.
<a href="https://nailtheestimate.com/asphalt-calculator/">Asphalt Calculator</a> (Nail The Estimate)