Gravel Driveway Cost Calculator
Quick answer: A new 1,000 square foot gravel driveway (about 10 × 100 feet) typically costs $3,200 to $8,600 with geotextile fabric, depending on the stone and how much grading is needed.
Estimate gravel driveway cost for a new driveway or a resurface. Enter driveway size to get a low, typical and high installed price with grading and fabric.
Estimated total
- Low
- $3,200
- Typical
- $5,350
- High
- $8,600
$5.35 per sq ft all-in (range $3.20–$8.60)
Where the money goes (typical)
- Materials
- $2,460 (46%)
- Labor
- $2,890 (54%)
Line items (typical)
| Crushed stone or crusher run | $5,000 |
| Geotextile fabric under the stone | $350 |
Angular stone that locks together. The standard for driveways.
General U.S. estimates for installed cost, not quotes. We compared them with HomeGuide's installed range (about $4 to $10 per sq ft) and Angi's material and labor figures. Prices reviewed November 2026. Get at least three local quotes before you commit.
A new gravel driveway is built in layers: a thick base of large stone, a middle layer and a finer top layer, each compacted. The installed price per square foot covers the stone, delivery, spreading and compaction. Resurfacing an existing driveway only needs a few inches on top and costs far less.
Enter the driveway size, choose the stone and whether it's new or a resurface. The estimator gives a low, typical and high installed cost with the labor share. To work out tons of stone, use the gravel calculator.
How the gravel driveway cost estimate works
- Enter the driveway area in square feet.
- Multiply it by the installed price per sq ft for the material you chose.
- Adjust for project type and your local cost level.
- Add the extras you ticked, such as removal, and any permit fee.
- Show the result as a low, typical and high total, split into materials, labor and fees.
Multiply driveway length × width. A single-car driveway is usually 10 to 12 ft wide; a 12 × 50 ft driveway is 600 sq ft. Include any parking pad or turnaround.
Gravel Driveway Cost by material
| Material | Installed per sq ft | Labor share | Notes |
|---|---|---|---|
| Crushed stone or crusher run | $3.00–$8.00 | 55% | Angular stone that locks together. The standard for driveways. |
| Pea gravel top layer | $3.50–$9.00 | 55% | Smooth and attractive but shifts under tires; needs edging. |
| Decorative stone (marble chips, river rock) | $5.00–$12.00 | 45% | Premium look and price. Usually laid over a crushed-stone base. |
Gravel Driveway Cost by size
Typical total with the low–high range below it. Assumes new driveway (base and top layers); average u.s.; geotextile fabric under the stone.
| Driveway area | Crushed stone or crusher run | Pea gravel top layer | Decorative stone (marble chips, river rock) |
|---|---|---|---|
| 300 sq ft | $1,600$950–$2,600 | $1,750$1,100–$2,900 | $2,500$1,550–$3,800 |
| 600 sq ft | $3,200$1,900–$5,150 | $3,500$2,200–$5,750 | $5,000$3,100–$7,550 |
| 1,000 sq ft | $5,350$3,200–$8,600 | $5,850$3,700–$9,600 | $8,350$5,200–$12,600 |
| 1,500 sq ft | $8,050$4,800–$12,900 | $8,800$5,550–$14,400 | $12,550$7,800–$18,900 |
| 2,400 sq ft | $12,850$7,700–$20,650 | $14,050$8,900–$23,050 | $20,050$12,500–$30,250 |
What affects gravel driveway cost
- New build or resurface. A new driveway needs 8 to 12 inches of stone in layers plus grading. A resurface is just 2 to 4 inches of top stone.
- Stone type. Crushed stone and crusher run are the cheapest and most stable. Pea gravel and decorative stone cost more and need edging.
- Grading and drainage. Clearing, cutting a crown so water runs off, and installing culverts or ditches can cost as much as the stone.
- Delivery distance. Stone is heavy, so trucking is a big part of the price. Quarries close to you mean cheaper stone.
- Length and access. Long rural driveways cost less per square foot but more in total. Narrow or soft access may need smaller trucks.
Frequently asked questions
How much does a gravel driveway cost?
A new 1,000 square foot gravel driveway (about 10 × 100 feet) typically costs $3,200 to $8,600 with geotextile fabric, depending on the stone and how much grading is needed.
How much does a gravel driveway cost per square foot?
New gravel driveways usually cost $3 to $8 per square foot installed in crushed stone, and up to $12 for decorative stone. Resurfacing an existing driveway costs roughly $1.25 to $3.50 per square foot.
Is a gravel driveway cheaper than concrete or asphalt?
Yes. Gravel typically costs a half to a third of what concrete costs per square foot, though it needs regular raking and new stone every few years.
How thick should a gravel driveway be?
A new driveway over soil needs 8 to 12 inches of compacted stone in two or three layers. A top-up on an existing driveway needs about 2 to 4 inches.
About these figures
General U.S. estimates for installed cost, not quotes. We compared them with HomeGuide's installed range (about $4 to $10 per sq ft) and Angi's material and labor figures. Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.