Chain Link Fence Cost Calculator
Quick answer: Installed, a galvanized chain link fence costs about $10 to $30 per linear foot, and vinyl-coated about $19 to $45 or more. Fixr's average is $13 to $27 per foot; HomeGuide quotes $10 to $40.
Estimate chain link fence cost per linear foot: galvanized or vinyl-coated, 4 to 8 ft tall, 11 or 9 gauge, with gates, privacy slats and old fence removal.
Estimated total
- Low
- $1,900
- Typical
- $2,900
- High
- $4,450
$19.33 per linear ft all-in (range $12.67–$29.67)
Where the money goes (typical)
- Materials
- $1,200 (41%)
- Labor
- $1,700 (59%)
Line items (typical)
| Galvanized, 11 gauge (standard residential) | $2,700 |
| Walk gate (about 4 ft wide) | $200 |
The cheapest installed fence. Fine for yards and pets; thinner wire dents more easily.
General U.S. estimates for installed cost, not quotes. Checked on 11 November 2026 against Fixr's chain link fence cost guide (updated 31 January 2025: $13 to $27 per linear foot installed on average, labor $10 to $20 per foot, removal $3 to $5 per foot, slats $2 to $3 per foot to install) and HomeGuide's chain-link fence cost guide (2026: $10 to $40 per foot, 150 ft $1,500 to $6,000, vinyl-coated $30 to $60 per foot). Prices reviewed November 2026. Get at least three local quotes before you commit.
Chain link is the cheapest fence to install in the U.S. Contractors price it by the linear foot, and the installed price covers steel posts set in concrete, top rail, the wire mesh (fabric) and labor. Gates, privacy slats and removing an old fence are priced separately.
Pick a wire type, a height and any extras. The estimator shows the low, typical and high installed cost, how much goes to labor versus materials, and the price per foot so you can compare quotes. For wood, vinyl or aluminum, use the general fence cost estimator.
How the chain link fence cost estimate works
- Enter the fence length in linear feet.
- Multiply it by the installed price per linear ft for the material you chose.
- Adjust for fence height and your local cost level.
- Add the extras you ticked, such as removal, and any permit fee.
- Show the result as a low, typical and high total, split into materials, labor and fees.
Measure the fence line with a measuring wheel or from a property map, adding each side separately. Don't subtract gate openings; the gate replaces that section but it still needs terminal posts. Note every corner and end, because terminal posts cost more than line posts.
Chain Link Fence Cost by material
| Material | Installed per linear ft | Labor share | Notes |
|---|---|---|---|
| Galvanized, 11 gauge (standard residential) | $12.00–$27.00 | 60% | The cheapest installed fence. Fine for yards and pets; thinner wire dents more easily. |
| Galvanized, 9 gauge (heavy residential) | $13.00–$30.00 | 60% | Thicker wire for a stiffer, longer-lasting fence. The most common upgrade for homes. |
| Vinyl-coated (black or green), 9 gauge | $19.00–$45.00 | 50% | Blends into the yard and resists rust better than bare galvanized. Black is the most popular color. |
| Chain link on wood posts | $20.00–$50.00 | 50% | Ranch-style look for rural lots. Wood posts need more upkeep than steel. |
Chain Link Fence Cost by size
Typical total with the low–high range below it. Assumes 6 ft; average u.s.; walk gate (about 4 ft wide).
| Fence length | Galvanized, 11 gauge (standard residential) | Galvanized, 9 gauge (heavy residential) | Vinyl-coated (black or green), 9 gauge | Chain link on wood posts |
|---|---|---|---|---|
| 50 linear ft | $1,100$700–$1,750 | $1,200$750–$1,900 | $1,700$1,050–$2,650 | $1,800$1,100–$2,900 |
| 100 linear ft | $2,000$1,300–$3,100 | $2,200$1,400–$3,400 | $3,200$2,000–$4,900 | $3,400$2,100–$5,400 |
| 150 linear ft | $2,900$1,900–$4,450 | $3,200$2,050–$4,900 | $4,700$2,950–$7,150 | $5,000$3,100–$7,900 |
| 200 linear ft | $3,800$2,500–$5,800 | $4,200$2,700–$6,400 | $6,200$3,900–$9,400 | $6,600$4,100–$10,400 |
| 300 linear ft | $5,600$3,700–$8,500 | $6,200$4,000–$9,400 | $9,200$5,800–$13,900 | $9,800$6,100–$15,400 |
What affects chain link fence cost
- Height. A 4 ft fence is common in front yards; backyards usually get 5 or 6 ft. Fixr's price table rises about $1 to $3 per foot from 4 ft to 8 ft, and 8 ft fences often need a permit.
- Wire gauge. Lower numbers mean thicker wire. Most homes use 9 to 11 gauge; 6 gauge is for commercial and security fencing and costs the most.
- Coating. Galvanized steel is the baseline. Vinyl-coated (black, green or white) adds roughly $5 to $15 per foot but lasts longer and looks less industrial.
- Gates. A single walk gate adds about $100 to $400 installed; a double driveway gate several hundred dollars, and rolling or cantilever gates far more.
- Site prep and posts. Rocky soil, roots, slopes and concrete that has to be cut through all add labor. Corner, end and gate posts are heavier and pricier than line posts.
Frequently asked questions
How much does a chain link fence cost per foot?
Installed, a galvanized chain link fence costs about $10 to $30 per linear foot, and vinyl-coated about $19 to $45 or more. Fixr's average is $13 to $27 per foot; HomeGuide quotes $10 to $40.
How much does a 150 ft chain link fence cost?
HomeGuide puts 150 feet at about $1,500 to $6,000 installed. For a 6 ft galvanized 9 gauge fence with one walk gate, this estimator gives about $2,050 to $4,900, with $3,200 typical.
How much does a 6 ft chain link fence cost?
About $13 to $30 per linear foot installed for galvanized, according to HomeGuide and Fixr. Vinyl-coated 6 ft fencing costs more, often $20 to $45 per foot.
Is chain link cheaper than a wood fence?
Yes. Galvanized chain link is the cheapest installed fence. A 6 ft wood privacy fence usually costs $22 to $45 per foot, against roughly $13 to $30 for chain link of the same height.
How much do privacy slats for chain link cost?
Fixr lists about $2 to $3 per linear foot to install slats, plus the slats themselves (about $55 a box for 10 ft of 6 ft fence), so roughly $5 to $11 per foot in total.
How long does a chain link fence last?
Fixr gives 10 to 15 years for galvanized and more than 25 years for vinyl-coated chain link, with 15 to 25 years or more for a well-maintained fence in general.
About these figures
General U.S. estimates for installed cost, not quotes. Checked on 11 November 2026 against Fixr's chain link fence cost guide (updated 31 January 2025: $13 to $27 per linear foot installed on average, labor $10 to $20 per foot, removal $3 to $5 per foot, slats $2 to $3 per foot to install) and HomeGuide's chain-link fence cost guide (2026: $10 to $40 per foot, 150 ft $1,500 to $6,000, vinyl-coated $30 to $60 per foot). Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.
Every cost range on this site is also published as an open dataset (CSV and JSON, CC BY 4.0): US home project costs 2026.
Add this chain link fence cost estimator to your site
Free for blogs, forums and contractors. Paste this code where you want the estimator; it works on phones and needs no sign-up.
Link to this page
Citing this estimate in a blog post, forum answer or client handout? Copy the HTML below.
<a href="https://nailtheestimate.com/chain-link-fence-cost/">Chain Link Fence Cost Calculator</a> (Nail The Estimate)