Well Pump Replacement Cost Calculator
Quick answer: Most homeowners pay $900 to $2,500 (This Old House, March 2026). HomeGuide's national average is $1,800, with submersible pumps at $1,000 to $2,500 installed and jet pumps at $400 to $1,400.
Well pump replacement cost by pump type: submersible, deep and shallow jet, constant pressure and solar, installed. Add a pressure tank, switch or inspection.
Estimated total
- Low
- $1,000
- Typical
- $1,800
- High
- $2,500
$1,800 per pump all-in (range $1,000–$2,500)
Where the money goes (typical)
- Materials
- $630 (35%)
- Labor
- $1,170 (65%)
Line items (typical)
| Submersible pump (deep well) | $1,800 |
The most common type. Sits down in the well; quiet and efficient. The pump alone is about $500 (This Old House).
General U.S. estimates for installed cost, not quotes. We compared them with This Old House's well pump cost guide (updated March 5, 2026: replacement $900 to $2,500; pump alone $200 to $500) and HomeGuide's well pump cost guide (August 7, 2025: average $1,800, range $1,000 to $2,500; installed price by pump type; labor $250 to $800; pressure tank $500 to $1,000; pressure switch $25 to $100; inspection $250 to $550; life 10 to 15 years). Prices reviewed November 2026. Get at least three local quotes before you commit.
Replacing a well pump costs about $900 to $2,500 installed for most homes, according to This Old House (March 2026). HomeGuide (August 2025) puts the national average at $1,800: submersible pumps for deep wells run $1,000 to $2,500 installed, deep well jet pumps $500 to $1,400 and shallow well jet pumps $400 to $1,000.
Pick the pump type and add a new pressure tank, pressure switch or inspection if you need them. The estimator gives a low, typical and high installed price with the equipment and labor split.
How the well pump replacement cost estimate works
- Enter the number of pumps in pumps.
- Multiply it by the installed price per pump for the material you chose.
- Adjust for your local cost level.
- Add the extras you ticked, such as removal, and any permit fee.
- Show the result as a low, typical and high total, split into materials, labor and fees.
The pump type usually follows the well depth: shallow wells up to about 25 ft use a shallow jet pump, 50 to 100 ft a deep well jet pump, and deeper wells a submersible pump. The well log or the old pump's label gives the depth and horsepower; a like-for-like swap is the cheapest job.
Well Pump Replacement Cost by material
| Material | Installed per pump | Labor share | Notes |
|---|---|---|---|
| Submersible pump (deep well) | $1,000–$2,500 | 65% | The most common type. Sits down in the well; quiet and efficient. The pump alone is about $500 (This Old House). |
| Deep well jet pump (50 to 100 ft) | $500–$1,400 | 65% | Above ground, near the well. Cheaper than a submersible but noisier and less efficient. |
| Shallow well jet pump (up to 25 ft) | $400–$1,000 | 65% | For very shallow wells and low water demand. The pump alone is about $200. |
| Constant pressure (variable speed) pump | $2,000–$5,000 | 55% | A variable frequency drive keeps pressure steady when several taps run at once. |
| Solar well pump | $1,500–$6,500 | 50% | For off-grid homes and sunny climates; the panels are most of the cost. |
Well Pump Replacement Cost by size
Typical total with the low–high range below it. Assumes average u.s..
| Number of pumps | Submersible pump (deep well) | Deep well jet pump (50 to 100 ft) | Shallow well jet pump (up to 25 ft) | Constant pressure (variable speed) pump | Solar well pump |
|---|---|---|---|---|---|
| 1 pump | $1,800$1,000–$2,500 | $950$500–$1,400 | $700$400–$1,000 | $3,500$2,000–$5,000 | $4,000$1,500–$6,500 |
What affects well pump replacement cost
- Pump type. HomeGuide's installed prices: submersible $1,000 to $2,500, deep well jet $500 to $1,400, shallow well jet $400 to $1,000, constant pressure $2,000 to $5,000, solar $1,500 to $6,500 and hand pumps $200 to $2,000. This Old House prices the pump alone at about $200 for a shallow jet, $300 for a deep well jet and $500 for a submersible.
- Well depth and horsepower. Deeper wells need longer drop pipe and wire and a stronger pump, and pulling a deep submersible takes more time and equipment. Larger households need a higher-horsepower pump.
- Labor. HomeGuide puts installation labor at $250 to $800, sometimes over $1,000 for hard jobs, plus $50 to $130 an hour if an electrician has to replace wiring. A replacement takes about 3 to 6 hours.
- Pressure tank and other parts. If the pump failed early, the pressure tank or switch may be the cause. HomeGuide lists pressure tanks at $500 to $1,000, pressure switches $25 to $100, tank bladders $50 to $100 and pump motors $500 to $1,000.
Frequently asked questions
How much does it cost to replace a well pump?
Most homeowners pay $900 to $2,500 (This Old House, March 2026). HomeGuide's national average is $1,800, with submersible pumps at $1,000 to $2,500 installed and jet pumps at $400 to $1,400.
How much does a submersible well pump cost to replace?
About $1,000 to $2,500 installed (HomeGuide). The pump itself is around $500; the rest is labor to pull the old pump, wire and pipe and lower the new one.
How much does a well pump cost without installation?
About $200 to $500 for common pumps (This Old House): roughly $200 for a shallow well jet pump, $300 for a deep well jet pump and $500 for a submersible. HomeGuide gives $150 to $1,700 depending on type and size.
How long does a well pump last?
About 10 to 15 years with regular care (HomeGuide). Running the pump dry, power surges and hard, mineral-rich water shorten its life.
What are the signs a well pump is failing?
Low or falling water pressure, little or no water, spitting faucets, cloudy or sandy water, new noises from the pump or tank and a higher electric bill. Short cycling often points to the pressure tank or switch rather than the pump.
How long does it take to replace a well pump?
About 3 to 6 hours for most jobs (HomeGuide), longer for deep wells or hard-to-reach well heads.
About these figures
General U.S. estimates for installed cost, not quotes. We compared them with This Old House's well pump cost guide (updated March 5, 2026: replacement $900 to $2,500; pump alone $200 to $500) and HomeGuide's well pump cost guide (August 7, 2025: average $1,800, range $1,000 to $2,500; installed price by pump type; labor $250 to $800; pressure tank $500 to $1,000; pressure switch $25 to $100; inspection $250 to $550; life 10 to 15 years). Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.
Every cost range on this site is also published as an open dataset (CSV and JSON, CC BY 4.0): US home project costs 2026.
Add this well pump replacement cost estimator to your site
Free for blogs, forums and contractors. Paste this code where you want the estimator; it works on phones and needs no sign-up.
Link to this page
Citing this estimate in a blog post, forum answer or client handout? Copy the HTML below.
<a href="https://nailtheestimate.com/well-pump-replacement-cost/">Well Pump Replacement Cost Calculator</a> (Nail The Estimate)