Skip to content
Nail The Estimate

Heat Pump Installation Cost Calculator

Quick answer: Most homes pay about $5,700 to $12,000 for a 3 ton ducted air-source heat pump installed, including a permit. Fixr's national average is $8,350; EnergySage's quote average is $15,393 because it includes larger and ductless jobs.

Heat pump installation cost by size and type: ducted air-source, cold-climate, ductless mini-split and geothermal. Low, typical and high installed prices.

tons
Material
Extras

Estimated total

Low
$5,750
Typical
$8,550
High
$12,300

$2,850 per ton all-in (range $1,917–$4,100)

Where the money goes (typical)

Materials
$4,620 (54%)
Labor
$3,780 (44%)
Permits & fees
$150 (2%)

Line items (typical)

Ducted air-source heat pump (standard, SEER2 14 to 16)$8,400
Permit and inspection$150

Replaces a central AC or furnace and uses your existing ducts.

General U.S. estimates for installed cost, not quotes. We compared them with Fixr's heat pump installation costs (updated January 22, 2026: $5,000 to $15,000, average $8,350; 3 to 4 tons $8,000 to $20,000; geothermal $15,000 to $35,000; permits $50 to $300) and EnergySage's 2026 marketplace quotes (updated March 19, 2026: ducted average $14,529 and $3,790 per ton; ductless $9,163 per ton). Prices reviewed November 2026. Get at least three local quotes before you commit.

A typical 3 ton ducted air-source heat pump costs about $5,700 to $12,000 installed, with $8,400 a common middle figure. Ductless mini-splits run about $2,500 to $8,500 per ton, and geothermal systems about $15,000 to $33,000 for 3 tons because of the ground loop. Fixr puts the national average for a heat pump installation at $8,350 (January 2026), while EnergySage's quote data averages $15,393 because it includes many larger and multi-zone jobs.

Heat pumps are sized in tons (12,000 BTU per ton). Enter your system size, choose the type, and add ductwork or a thermostat if you need them. The estimator gives a low, typical and high installed cost with the labor and equipment split. The 30% federal tax credit (25C) ended for heat pumps installed after December 31, 2025, so 2026 prices here are before any state or utility rebate.

How the heat pump installation cost estimate works

  1. Enter the system size in tons.
  2. Multiply it by the installed price per ton for the material you chose.
  3. Adjust for installation and your local cost level.
  4. Add the extras you ticked, such as removal, and any permit fee.
  5. Show the result as a low, typical and high total, split into materials, labor and fees.

If you are replacing an AC or heat pump, its size is in the outdoor unit's model number: 18, 24, 30, 36, 42, 48 or 60 means 1.5 to 5 tons (thousands of BTU ÷ 12). As a rough guide, homes need about 1 ton per 500 to 600 sq ft, so 1,500 sq ft is about 2.5 to 3 tons. For a new system, ask for a Manual J load calculation; cold-climate homes often need more heating capacity than cooling.

Heat Pump Installation Cost by material

MaterialInstalled per tonLabor shareNotes
Ducted air-source heat pump (standard, SEER2 14 to 16)$1,900–$4,00045%Replaces a central AC or furnace and uses your existing ducts.
High-efficiency or cold-climate variable-speed (SEER2 18+)$3,000–$6,00040%Keeps heating output in freezing weather; quieter and more even.
Ductless mini-split (one or more indoor heads)$2,500–$8,50050%No ducts needed. Each extra indoor head adds equipment and labor.
Geothermal (ground-source) heat pump$5,000–$11,00055%Most of the cost is drilling or trenching the ground loop.

Heat Pump Installation Cost by size

Typical total with the low–high range below it. Assumes replacing an existing ac or heat pump in place; average u.s.; permit and inspection.

System sizeDucted air-source heat pump (standard, SEER2 14 to 16)High-efficiency or cold-climate variable-speed (SEER2 18+)Ductless mini-split (one or more indoor heads)Geothermal (ground-source) heat pump
1 tons$2,950$1,950–$4,300$4,350$3,050–$6,300$4,650$2,550–$8,800$7,650$5,050–$11,300
2 tons$5,750$3,850–$8,300$8,550$6,050–$12,300$9,150$5,050–$17,300$15,150$10,050–$22,300
2.5 tons$7,150$4,800–$10,300$10,650$7,550–$15,300$11,400$6,300–$21,550$18,900$12,550–$27,800
3 tons$8,550$5,750–$12,300$12,750$9,050–$18,300$13,650$7,550–$25,800$22,650$15,050–$33,300
4 tons$11,350$7,650–$16,300$16,950$12,050–$24,300$18,150$10,050–$34,300$30,150$20,050–$44,300
5 tons$14,150$9,550–$20,300$21,150$15,050–$30,300$22,650$12,550–$42,800$37,650$25,050–$55,300

What affects heat pump installation cost

  • Type of heat pump. A ducted air-source unit that uses your existing ducts is the cheapest per ton. Cold-climate variable-speed models cost more. Ductless mini-splits cost more per ton because every room needs its own indoor head, and geothermal costs the most because of the ground loop.
  • Size and efficiency. Bigger systems cost more but not proportionally. Efficiency matters too: Fixr lists SEER2 14 to 15 systems at $5,000 to $12,000 and SEER2 20+ at $15,000 to $25,000.
  • Ducts and electrical. Leaky or undersized ducts may need sealing or replacement. Homes with a 100 amp panel may need an electrical upgrade before a heat pump can be added; get the electrician's price separately.
  • What you are replacing. Swapping an existing AC or heat pump is simplest. Converting from a furnace-only or boiler home needs a new outdoor pad, refrigerant lines and a 240 volt circuit.
  • Rebates in 2026. The federal 25C credit (up to $2,000) ended for installs after 2025. Income-qualified HEAR rebates of up to $8,000 run through state programs where funding remains, and many utilities offer their own rebates. Check before choosing equipment.

Frequently asked questions

How much does heat pump installation cost?

Most homes pay about $5,700 to $12,000 for a 3 ton ducted air-source heat pump installed, including a permit. Fixr's national average is $8,350; EnergySage's quote average is $15,393 because it includes larger and ductless jobs.

How much does a heat pump cost per ton?

About $1,900 to $4,000 per ton installed for a standard ducted system, $3,000 to $6,000 for cold-climate models, $2,500 to $8,500 for ductless mini-splits and $5,000 to $11,000 for geothermal. EnergySage's 2026 quote data averages $3,790 per ton for ducted and $9,163 for ductless.

How much does a heat pump cost for a 2,000 sq ft house?

A 2,000 sq ft home usually needs 3 to 4 tons. Fixr puts that at $8,000 to $20,000 installed depending on efficiency; this calculator gives about $8,400 to $11,200 typical for a standard ducted unit.

How much does a ductless mini-split cost to install?

Fixr lists ductless mini-splits at $2,000 to $8,000 installed, which covers most single-zone jobs. Multi-zone systems cost much more; EnergySage's average ductless quote is about $26,000.

How much does a geothermal heat pump cost?

Fixr lists geothermal at $15,000 to $35,000 installed. Most of the cost is drilling wells or digging trenches for the ground loop, which depends on your soil and lot.

Is there a federal tax credit for heat pumps in 2026?

No. The One Big Beautiful Bill Act ended the 25C home improvement credit for equipment installed after December 31, 2025. If your heat pump was installed in 2025, you can still claim up to $2,000 on your 2025 return. In 2026, look for state HEAR rebates and utility rebates instead.

Is a heat pump cheaper than an AC and furnace?

Upfront, a standard heat pump costs about the same as replacing a central AC and gas furnace together. Running costs depend on your electricity and gas prices and your climate.

About these figures

General U.S. estimates for installed cost, not quotes. We compared them with Fixr's heat pump installation costs (updated January 22, 2026: $5,000 to $15,000, average $8,350; 3 to 4 tons $8,000 to $20,000; geothermal $15,000 to $35,000; permits $50 to $300) and EnergySage's 2026 marketplace quotes (updated March 19, 2026: ducted average $14,529 and $3,790 per ton; ductless $9,163 per ton). Last reviewed November 2026. Your price depends on your home, your region and the contractor, so treat this as a budget range and compare it with written quotes.

Every cost range on this site is also published as an open dataset (CSV and JSON, CC BY 4.0): US home project costs 2026.

Add this heat pump installation cost estimator to your site

Free for blogs, forums and contractors. Paste this code where you want the estimator; it works on phones and needs no sign-up.

Link to this page

Citing this estimate in a blog post, forum answer or client handout? Copy the HTML below.

<a href="https://nailtheestimate.com/heat-pump-installation-cost/">Heat Pump Installation Cost Calculator</a> (Nail The Estimate)